Ctek MXS 5.0 12V 5A 8 Stage Battery Charger
$199.99
$0.00
The Ctek MXS 5.0 12V 5A 8 Stage Battery Charger is a great value for money charger, so you should never suffer a flat battery again.
The MXS 5.0 is an advanced microprocessor controlled battery charger which gives unrivalled performance for lead acid batteries from 1.2-110Ah. It comes with automatic temperature compensation built in which ensures the best charging performance. The MXS 5.0 also includes battery diagnosis to establish whether your battery can receive and retain a charge, patented automatic de-sulphation program, an AGM option and a special recondition mode for reconditioning deeply discharged batteries.
The MXS 5.0 charges your battery using a unique 8-stage process which supplies the right voltage to the battery at the right point in time in the charging cycle. The charger also automatically switches to maintenance charging for batteries left charging for more than ten days.
Step 1: Desulphation - pulsing voltage removes sulphates from the lead plates of the battery restoring the battery capacity
Step 2: Soft Start - tests if the battery can accept charge. Charging begins if the battery is OK
Step 3: Bulk - charging with maximum current until approximately 80% battery capacity
Step 4: Battery ready to use - charging with declining current to maximise up to 100% battery capacity
Step 5: Analyse - tests if the battery can hold charge. Batteries that cannot hold charge may need to be replaced
Step 6: Recond - reconditioning function for deeply discharged batteries
Step 7: Fully charged battery - maintaining the battery voltage at maximum level by providing a constant voltage charge
Step 8: Maintenance charging - maintaining the battery at 95100% capacity. The charger monitors the battery voltage and gives a pulse when necessary to keep the battery fully charged.
Ctek MXS 5.0 12V 5A 8 Stage Battery Charger Features:
Fully automatic 8-step charger
Provides fully automatic charging and can be left attached for months
Spark-proof and reverse polarity protected to ensure safety and vehicle electronics are not harmed during charging
Charges, conditions and maintains all types of lead acid batteries: wet, MF, AGM, GEL, Dry and Calcium
Energy-efficient charges that extend battery life, reducing unnecessary replacement and waste
Ctek MXS 5.0 12V 5A 8 Stage Battery Charger Specs:
Charging voltage: 14.4/14.7/15.8 V
Charging current max: 5A
Battery capacity: 1.2110 Ah, up to 160 Ah for maintenance
Ripple: < 4%
Ambient temperature: -20C to +50C, output power is reduced automatically at high temperatures
Battery size: 1.2-110AH up to 160ah for maintenance
Insulation: IP65 (splash and dust proof)
Weight: 0.6kg
Dimensions (LxHxW): 168 x 65 x 38mm
The MXS 5.0 charges your battery using a unique 8-stage process which supplies the right voltage to the battery at the right point in time in the charging cycle. The charger also automatically switches to maintenance charging for batteries left charging for more than ten days.
Step 1: Desulphation - pulsing voltage removes sulphates from the lead plates of the battery restoring the battery capacity
Step 2: Soft Start - tests if the battery can accept charge. Charging begins if the battery is OK
Step 3: Bulk - charging with maximum current until approximately 80% battery capacity
Step 4: Battery ready to use - charging with declining current to maximise up to 100% battery capacity
Step 5: Analyse - tests if the battery can hold charge. Batteries that cannot hold charge may need to be replaced
Step 6: Recond - reconditioning function for deeply discharged batteries
Step 7: Fully charged battery - maintaining the battery voltage at maximum level by providing a constant voltage charge
Step 8: Maintenance charging - maintaining the battery at 95100% capacity. The charger monitors the battery voltage and gives a pulse when necessary to keep the battery fully charged.
Ctek MXS 5.0 12V 5A 8 Stage Battery Charger Features:
Fully automatic 8-step charger
Provides fully automatic charging and can be left attached for months
Spark-proof and reverse polarity protected to ensure safety and vehicle electronics are not harmed during charging
Charges, conditions and maintains all types of lead acid batteries: wet, MF, AGM, GEL, Dry and Calcium
Energy-efficient charges that extend battery life, reducing unnecessary replacement and waste
Ctek MXS 5.0 12V 5A 8 Stage Battery Charger Specs:
Charging voltage: 14.4/14.7/15.8 V
Charging current max: 5A
Battery capacity: 1.2110 Ah, up to 160 Ah for maintenance
Ripple: < 4%
Ambient temperature: -20C to +50C, output power is reduced automatically at high temperatures
Battery size: 1.2-110AH up to 160ah for maintenance
Insulation: IP65 (splash and dust proof)
Weight: 0.6kg
Dimensions (LxHxW): 168 x 65 x 38mm